Home > Moved To > {Moved To Hardware}Config H/drive 486

{Moved To Hardware}Config H/drive 486

If this does not work, order Symantec's Ghost and make a clone. so for the pros and cons IDE Pros easily and cheaply available most motherboards already have interfaces built in saving you a expansion card slot less hassle setting up Cons considered Microsoft actually recommends this to free up memory. By doing this, the maximum head value that can be stored in the remaining 6 bits of the head register is 63 (64 heads total). navigate here

select "file" from up top and select "open". If it was an NT machine, hopefully the user had a NT Emergency Boot Disk specific to that unit and I would use it and go the "Repair" route. It frees up a block that is reserved for a monochrome (black & white) displays. I use USER and type in the parameters written on the hard disk (of course I have to open the machine to find out). my review here

If you are instead getting Invalid drive specification errors, you probably aren't able to access the HD at all, even at a DOS prompt. Copy the data off ASAP and ditch the old drive to avoid the temptation to keep it as spare storage. The Software Barrier The software barrier is one directly related to DOS or MS-DOS® partitioning issues which are derived from the File Allocation Table (FAT) that DOS uses to keep track This the official memory manager and the only one I'll be covering here.

This can be expensive but may be worth it. If power (See step #2) If no power, swap/replace plugs/power supply. Newer SCSI drives may use a combined connector that combines the power and data cable. Here you can see it all running as well as the parts of DOS that got placed in upper memory.

Lo and behold, it worked. Replace the problem system. You should see the list of files for the questionable drive that you have HOT PLUGGED into this system. http://www.hirensbootcd.org/200-ways-to-revive-a-hard-drive/4/ The setup will also ask if you want the "Express" or "Advanced" option.

The Hardware Barrier BIOS developers and engineers, in order to solve the 528 MB problem we mentioned earlier, employed different methods to accomplish resolution. the first is MEM which displays the amount of conventional memory you have free as well as XMS and EMS. Listen for unpleasant noises (after head crash). Hard Drive Recovery Tip From: Phil Murphy First thing I would do is to check the BIOS to make the sure the disk is set to Auto and doesn't have any

Copyright ©1995-2003 DEW Associates Corporation. https://ancientelectronics.wordpress.com/2013/12/11/beginners-guide-to-installing-and-optimizing-ms-dos-6-22/ From now on, all you have to do is to backup your "data" directory to the CD and copy the Ghost image to the second CD, and if you need to So, for three hours, I sat there tapping this drive until I got all the company's accounting data off of it. Check cables are on and are the correct way round.

The SCSI is a full height drive which is an older style and is taller then a more common 3.5″ drive. check over here InfoWorld also celebrates people, companies, and projects. Troubleshoot the computer later when you have time. If the problem is software-related, for example, the operating system is corrupted, the hard drive can be attached as a "slave" and the important data copied to the "master" bootable drive.

Have you managed to overcome the 512 MB barrier by making more partitions? Remove from system A and B the HD, and ribbon cable that connects it to the motherboard…(MB) Step 5. I use Super Fdisk myself available here. his comment is here You are being to confusing...

I also will see if the BIOS can automatically and correctly identify the drive. Possible Solutions:This barrier or limitation is most often found in older legacy systems (pre-Pentium® II) such as 286, 386, 486 and early Pentium® I systems. Try a drive overlay such as those made available by Maxtor and Western Digital.

If the drive wasn't visible, then remove the drive and try to revive it in another PC.

I end by selling the customer a new drive and restoring their data from the image. If C is there. Anything to get the customer back in business. Sometimes a connector did come out a bit on one side and you put it back properly without noticing. "Put the right spin on things" Next, is the drive spinning when

Please try the request again. As for me, I have had good success with this method (about 50-50). If not, back to Norton Disk Doctor. weblink Unless you plan on having more then 8 drives but you can set it to whatever letter you want but the closer to Z the less mem it frees up.

If they call again with the same problem, no backups etc., give them the number of your competition. The above is predicated on the fact that the drive will spin up. First of all, install the OS with all the associated programs and utilities including MS Office, Internet browsers, etc. Then detach the data ribbon cable from the running drive.

The fellow who had built it for him was an IBM technician and gave him the hair dryer idea because that is what IBM used to do to restart the drives just change Z to something like H and it should free an additional 2-3kb of  memory. I would next cold boot to a virus scan diskette and verify the hard drive could be accessed and free of viruses. Hard Drive Recovery Tip From: NETSPECS There is no one way to this matter to the disk drive quiz.

I never use cable select. Do not expect this technique to work twice! When it boots up, make sure you can hear the all drives spin up. Replace the problem system.

Just hit Enter here. Also, if the drive does detect, but has bad sectors, try Scandisk (thorough option) or Norton Utilities Disk Doctor. This site is completely free -- paid for by advertisers and donations. And as long as the hard drive is not physically destroyed, you will be able to copy over all the recoverable data .

Possible Solutions:This barrier or limitation is most often found in older legacy systems such as early Pentium® I and II systems. SMARTDRV is a caching program. Of course, you could try reinstalling the operating system after formatting but you'd lose all data without a backup. Here are the recommended solutions.

Hard Drive Recovery Tip From: Murray Voight You need to be able to boot into the system. is Fat16/32, try a boot diskette (Win95/98).