Home > Hard Drive > 1 SATA Drive And 3 ATA Drives - Am I Attempting The Impossible?

1 SATA Drive And 3 ATA Drives - Am I Attempting The Impossible?

Contents

Magnetic readings can be taken from overwritten disks and calculating flux change can allow for recovery of surprising amounts of information. Also, make sure that only the drive that you wish to wipe is attached to the computer you wish to wipe as DBAN will attempt to wipe any drive that it You'll have a dual boot system then and will always have access to one or the other if something goes wrong with one. As for the people commenting on this article that claim to have software that can retrieve overwritten data, they are either very naive or simple lying. http://webadapt.org/hard-drive/160-gig-sata-drive-only-showing-up-as-130-gig.php

From now on, I will just be looking on this site for the comics… the articles have lost any credibility that they may have had at one time from my point The process is basically forensic science against lax security. Does the drive appear on your host as /dev/sdX? June 6, 2012 spike @Storm: If you have any way to prove that, with a bit more detail on specific conditions, I would be interested to see it. https://discussions.apple.com/thread/5393845?start=10&tstart=0

Sata Hard Drive Power Cable

First check what type of interface cable your current hard drive has. Like Show 0 Likes (0) Actions 1 2 Previous Next Go to original post Actions Remove from profile Feature on your profile More Like This Retrieving data ... How many writes and revolutions do you suppose that little WD spinner has completed?

Traditionally, hard drives have used a ribbon data cable, about 2 inches wide, to connect to the motherboard; this was known as a PATA cable, for Parallel ATA cable. After the installation thinks that it is complete(but it never completed properly) I CANNOT boot from the drive ontowhich I installed the operating system.Here is what the screen looks like:Windows XP It's not some additive equation where if you overwrite a 1 over a 0, then come back and subtract the 1 then you get the original 0. How To Connect Hard Drive To Motherboard Very fast.

Encryption can be a problem for us, but if we really really want that data and are willing to wait, we can get past it using some advanced brute force algorithms Sata Power Connector Next step I remove the damaged platters and cut them into 10-14 pieces each I drop the pieces into a small crucible that melts metal and let it have its way ooops i mean… our holiday pics.. https://www.cnet.com/forums/discussions/9-16-05-moving-your-old-hard-drive-to-a-new-computer-125650/ A slower drive on the same channel as a faster drive will react slower to the requests by the controller.

The ASUS manual helped, but only a little about this important step.An interseting aside: Until I made an array, even the Seagate disk prep tools could not see the disk. Hard Drive Connector Types When I load the VM again, it says my disk is a SCSI disk. I actually use the programs (FTK and Encase) that some others talk about. Re: dual booting on SATA physical disks Malibyte Aug 8, 2006 10:12 PM (in response to petr) Petr:I'm also trying to do this...two flavors of Linux (Ubuntu 6.06 AMD64 and Mandriva

Sata Power Connector

If you need Plausible Deniability then do not use TrueCrypt on any device that utilizes wear-leveling. June 4, 2012 huh Dispatch the folio. Sata Hard Drive Power Cable It's nice to see that there are others like me with at least SOME knowledge on the subject. How To Connect Sata Hard Drive To Motherboard If I > try to reinstall XP without the IDE drive then the install won't run because > it says that there are no drives at all.> > I can use

This is a fairly in-depth article as I wanted to make sure that you understood how the program works and what some of the other wiping methods and options are available. http://webadapt.org/hard-drive/2-drives.php Creating a RAID Setdoes not work because only one drive is recognized as being present andif you select Resolve Conflicts you get the message that there are notany conflicts. Get the answer RickDec 16, 2004, 5:21 PM Archived from groups: microsoft.public.windowsxp.hardware (More info?)BobV wrote:> I have a new ASUS A7N8X-E with a SATA controller on board, and a new WD If they are on a CD, copy them to a floppy. Sata Power Cable

Lets see what will happens. That's why using the drive as a virtual SCSI drive will fix the problem for me, but I don't know why this is not supported. When the drive is running flip the switch and when the brake fluid comes in contact with the drive it will scrub off all of the magnetic coating on the disk check over here Saved me many times!

is simply to re partition the drive preform a full format and then fill the drive with music files. Sata Data Cable I do not use Maxtor drives and IDEFINITELY do NOT use Western Digital drives.If I attempt to load Windows XP Professional SP2 on the 1 SATA drivethat is recognized I can That's really quite simple as you go for 'Instal' on the first screen that comes up, then 'Repair' on the second screen, which also allows you to choose where you want

Most computers are sold with SATA disks nowadays...

If not I will buy just the one single model on this planet you have not tested, and then?Anyway, how can one claim, that "every" and "modern" SATA-III drive work, that Can anyone help me? I stayed with the same chart and just positioned them to the slave position as shown on the chart with great results. Sata Interface Cable June 4, 2012 zbeast my method for deleting data from old hd's.

The forensic recovery of data using electron microscopy is infeasible. This mean, for reconstructing of one lousy megabyte, you'd need to know 8388608 exact head positions and still have less than <1% chance for recovery, for each byte. If you don’t own an anti-static wristband (see image below), you can ground yourself by touching a solid and grounded piece of metal, for example the leg of a table or http://webadapt.org/hard-drive/2-drives-how-to-use-2nd.php I only had one drive which was connected to a SATA port on the mobo.

Trying to create a VM with either Windoze or Ubuntu as the guest (using the raw disk) is impossible because the SATA drive is not given as an option under "select In the scenario, I'm going to assume there is a hot-spare drive that can be used for the rebuild in the RAID group. Army Environmental Command on Flickr JOIN THE DISCUSSION Tweet Chris Hoffman is a technology writer and all-around computer geek. Use this is you are going to re-use the device yourself.

Most hardware will go through several retries to read the sector but after a certain number of retries and/or a certain period of time, it will fail and the drive reports Please read this article regarding wear-leveling and how to use TrueCrypt securely on an SSD. And just offering a firmware update, if it even exists - (my experience is, that support and developement of firmware gets more and more some kind of letting the customer alone but if you can rase the temperature over the Curie's point (around 400°C, if I remenber), then any magnetic remanence will be void, including the neodyne permanent magnets needed to move

AnonymousDec 17, 2004, 10:16 PM Archived from groups: microsoft.public.windowsxp.hardware (More info?)"BobV" wrote>> I can find no way to configure the boot drive to use the SATA ports in BIOS,> I Is the SATA controller >>> enabled in BIOS? Flag Permalink Reply This was helpful (0) Collapse - Other issues by cactusgal / September 16, 2005 7:51 AM PDT In reply to: Other issues I don't have any problems with If you have any understanding at all of the physics of hard disks and the controllers that they use you will realize that such is completely impossible.

Just do 3 to be on the safe side. @Atlantis: Don't underestimate your child :) If you are smart, your child probably is, too!