Home > Computer Won 39 T > [SOLVED] Computer Will Not Bootup

[SOLVED] Computer Will Not Bootup


If you read my last post, you'll see that this is part of my explanation to test if your motherboard and processor are both in good working condition. I have been reading some of your info on this site and have been impressed with your knowledge. Troubleshooting boot issues on a PC can be difficult, because there are so many factors at play, both software and hardware. So Where Does that Leave Us? have a peek here

Report gerad- Aug 7, 2009 at 10:24 PM I also have this same problem... If you see the LEDs near the caps lock or num lock keys blinking (usually 1 - 8 blinks in a series), contact HP for assistance. Mid-2009 and later models with EFI See Testing for Hardware Failures (Windows 7 and Windows Vista) for information on accessing the EFI to run memory and hardware diagnostic tests. I don't think is shouldn't be doing this with 38 percent memory free. http://ccm.net/forum/affich-27227-computer-powers-on-but-does-not-boot

Computer Not Powering On

Report Subham- Oct 20, 2009 at 01:50 AM Hi Akshay, I found all your repeated response on this forum.Thats really helpful.Thanks for all this.I have similar problem with my PC.As you very thankful to you Report Arash- Jul 26, 2009 at 02:52 AM Hi Ashkay, HOwru mate I need ur help Actually I started my PC today morning and it said "Power If your computer does not boot to Safe Mode, select from the following options to troubleshoot. Zurück zum Anfang Kein POST Der Begriff "POST" steht für "Power-On Self-Test" (Einschaltselbsttest), der aus einer Reihe von Überprüfungen am Computer besteht, wenn dieser gestartet wird.

Read More . RESET CMOS, REMOVING MEMORY, UNPLUGGING ALL DEVICES, REMOVING CMOS BATTERY, TRIED POWER SUPPLY IN ANOTHER SYSTEM AND IT WORKED, TRIED ANOTHER MEMORY, but nothing happened. HELP!!! Pc Wont Boot To Bios Report Dmt94666- Jul 9, 2009 at 09:14 AM Hi I removed my memory and theres no beeping sounds also I had a look at my processor and it has some chips

Verify that the AC adapter is not damaged and is connected correctly to a working wall outlet plug. Computer Won't Boot Windows 7 Thanks for the same. So in summation, thank you for your considered and considerate advise. Does it heat up when you remove the fan and press the power switch on your casing.

Windows 7, Vista , or XP operating system Depending on the condition of the hard drive, the recovery utility allows you to make a backup of all of your personal files Computer Has Power But Wont Turn On You can short the appropriate motherboard pins together (check which ones in your motherboard manual) to eliminate the power button from the equation. Do you think the power supply might also be bad? Thanks again.

Computer Won't Boot Windows 7

Always turn off and unplug the PC before touching, adding or removing parts within the PC. http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot Tap F8 on the keyboard immediately after the Dell logo screen disappears until you see the Windows Advanced Options Menu on the screen. (If the Windows Advanced Options Menu does not Computer Not Powering On Use Windows Advanced Boot Options to start computer If computer does not start into Windows, turn on the power and press the f8 key. Computer Won't Boot Up Black Screen Turn on the power and press f8 to open the Windows Advanced Boot Option screen.

Try swapping the memory to another slot. http://webadapt.org/computer-won-39-t/solved-computer-will-not-boot.php Please help me. Do you hear the continuous beep sound when you remove the memory card, if not then the problem lies either with the motherboard or with the processor. Fix Rebooting Windows If Windows continuously reboots, in Windows 8 and above the operating system should automatically enter the System Recovery Options menu after the third forced reboot. My Computer Wont Turn On And Beeps

This is what I'm getting: -laptop is plugged in the mains, I press the power button diodes turn on as normally, the cpu fan spins for 5 seconds then stops, no Only then we can determine the problem and the resulting solution... Einige Desktop-PCs haben keineF12-Taste. Check This Out Check to see that your hard drive is displaying properly.

Go to www.update.microsoft.com website and run the Windows Update. Laptop Not Booting There's a good chance you can figure out exactly why your computer won't start and then get it back up and running.Don't Want to Fix This Yourself?See How Do I Get If you performed one or more of the troubleshooting processes and your computer booted normally into the Windows operating system, you should do the following to prevent future problems: Run HP

After the format finishes, you can then boot from the USB drive as if it were a DVD.

See Get More Help for information about contacting me for more help on social networks or via email, posting on tech support forums, and more. Common reasons why a newly built PC won't boot are: Power leads improperly attached to motherboard. I bow to you Lord Akshay ;-) Thank you. Computer Won't Boot Windows 10 It could also be a disc left in the DVD or Blu-ray drive, so check those too.

Symptom: Displays Windows logo on screen and hangs Symptom Possible Cause During startup, the Windows logo displays, but then the startup process stops. I think it didn't shut down all the way last night. If the LEDs glow and the computer starts, the AC adapter might need to be replaced. http://webadapt.org/computer-won-39-t/solved-computer-does-not-start.php After tapping F8, Windows 7 (and Vista) will enter into the Advanced Startup Options menu.

few days ago switched on laptop (fujitsu-siemens amilo li 2727) night after installing digi camera. Then,nothing else. If your computer is starting up but you can't see anything, there could be something wrong with your monitor. I want to clean it of all my pics & short home movie clips but it's really not that low on memory, and now I can't get it to recognize a

Is there any way I can determine if it is definitely the MB, or did a wire come loose during shipping? Use Clean-Boot Troubleshooting to Isolate the Software Issue A program or application may be interfering with the normal boot process of Windows. Note: If resetting the BIOS to factory defaults does not resolve the issue, you may also try to update the BIOS to the latest version to resolve issues related to the The first step to determine what you'll need to do is to try to turn the computer on. 2 Click one of the following links based on what happens.

The best tip here is to disconnect everything except the bare minimum needed to boot to the BIOS: Motherboard CPU (with heatsink attached) Graphics card (if there's a graphics output on Hard drive connected to the wrong SATA port. I checked event logs and it had a lot of cd-rom errors. This page requires Javascript.

If the computer starts normally after performing a hard reset, you are done troubleshooting. I took the 2 memory sticks out( is that what you mean by VGA cards?) cleaned both sides on the copper pins with an eraser. It might be that your power supply has simply failed. Then select Advanced options.

Recognize Blink Codes On HP Pavilion and Compaq Presario computers built in 2009 or later, the startup diagnostics use blinking LEDS to identify errors. Boot the Computer into Safe Mode Start the computer. Have you performed the processor test? Report Nik- Mar 19, 2009 at 06:13 PM I owe you a beer, it was all dirty ram, thank you so much!

The only symptom is usually the simple fact that "nothing works" which isn't much to go on.Add to this the fact that whatever is causing your computer not to start could The computer can usually be restarted by turning the power off and then on, but ignoring the error message does not resolve a recurring problem. In your case, the problem almost certainly relates to indiscriminate use of a data backup and recovery solution, which damaged your operating system’s software. Learn more You're viewing YouTube in German.