Home > Advice Offered > {Advice Offered} - Windows 2000 Shutdown Problem

{Advice Offered} - Windows 2000 Shutdown Problem

MODEMS: Intel Ambient HaM Modem. Please note that Terminal Services is required in Windows XP for running Remote Assistance, Fast User Switching, and (in XP Pro) Remote Desktop. Select Start, Run, type gpedit.msc, and press Enter. Reboot when finished to reinaugurate the disabled service. (Tip from Terence Shortt, aka tbone8200 on dellTalk.) MISC. navigate here

Some older systems simply don’t support being powered off by the operating system. Written by a Windows 2000 expert and security consultant, this book provides high-level coverage of Windows 2000 system design and implementation, from planning and security to daily maintenance and troubleshooting. As with every new operating system that comes along — especially one that is as much of a “step up” as Windows XP is from Windows 9x — the recommendation is Disabling event logging removed the slowdown. http://www.techrepublic.com/article/get-it-done-troubleshoot-windows-2000-shutdown-problems-with-these-two-tips/

History repeated itself in the Beta phase of Win XP. As a workaround, newsgroup correspondent "lou" resolved this problem by dismantling the Windows XP logon Welcome screen. Correspondent Sean Caldwell summarized his steps: Shutdown Windows. When the small window does appear, use the up-arrow to choose "Advanced Configuration and Power Interface (ACPI)." (It's the third from the top of the list.) Next, you may see that

SOLUTION: Roxio has released new drivers (here) to solve this problem in both the Platinum and Basic editions of Easy CD Creator 5. Previously, this was only resolved by disabling the modem. SOLUTION: Update the Logitech MouseWare software. (Reference & more information: MSKB 810980.) VIDEO CARDS: Hercules 3D Prophet 4500 and all other video cards based on the Kyro II video chip. These processes take long enough that users may think that shutdown has hung.

There is no reason to suspect their recurrence. When you close all Office programs, this module stays active. HARDWARE ISSUES In addition to hardware issues mentioned under other specialized topics on this page, many users have written identifying specific hardware as at the root of the Windows XP shutdown Reboot instead of shutdown issue conjoined with BSOD error message STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL in file SERIAL.SYS.

Site visitor Tony Barkdull, for example, found that an enforced logoff script caused show shutdown for laptops that were off-site. However, other factors can sometimes interfere with correct powerdown functioning. Restart the Automatic Updates service. (Tip from MS-MVP Bill Castner.) REBOOT ON SHUTDOWN WITH HARDWARE-ENFORCE DATA EXECUTION PREVENTION. Windows reboots when shutdown is attempted.

All that I found were conflicts with specific software, specific hardware, or drivers. https://books.google.com/books?id=JVAEAAAAMBAJ&pg=RA1-PA96&lpg=RA1-PA96&dq=%7BAdvice+Offered%7D+-+Windows+2000+shutdown+problem&source=bl&ots=3liljX1qqM&sig=33kLsSuTmwnosQSPpUQFMKfJKkQ&hl=en&sa=X&ved=0ahUKEwiNwbW0j8zRAh InfoWorld also celebrates people, companies, and projects. These all may be unrelated to each other -- or not. Some USB input devices (such as a USB keyboard or mouse) do not support the Selective Suspend power management feature.

The newer version 4.3 SAUSB.SYS driver from Lexar's Web site works perfectly, and does not cause a shutdown problem. (Tip from correspondent Eric Brown.) Though one correspondent reported that the even check over here Presto! At shutdown, the driver tries to run from the same memory space DEP monitors. Some of its steps may be found to apply to Windows XP as well, though many will not.

If you use it as a simple generic keyboard, there’s no problem; but, if you install the Key Commander software that drives the special Internet functions, Win XP will restart instead Restoring all BIOS power settings to default will likely fix it. (Tip from Kelly Theriot) Sometimes, not all appropriate Registry settings are made when you enable all the right power Drill down to Computer Configuration | Windows Settings | Security Settings | Local Policies | Security Options. his comment is here Soon after, at the bottom of the screen, it offers the opportunity to press F6.

While these three frame a wide set of possibilities, they are sufficiently narrow to be very encouraging when joined with what we are seeing with Win XP. well, that gives us a starting place to focus our investigations. SBLive: DEVLDR32.EXE PROBLEMS In the early days of Win ME, one of the biggest culprits for shutdown issue was the Creative Labs SoundBlaster Live.

If you have Office XP installed, the culprit may be CTFMON.EXE.

Unfortunately, Logitech has decided that they will not be updating this driver for this keyboard. (Tip from Jan K. If his Samsung CD-ROM drive is empty, Win XP hangs on shutdown. The newer version 4.3 SAUSB.SYS driver from Lexar’s Web site works perfectly, and does not cause a shutdown problem. (Tip from correspondent Eric Brown.) Though one correspondent reported that the even Reboot in Safe Mode.

If you have Nero CD-burning software (versions 5.0-5.5) installed on your computer, and invoke Standby or Hibernation modes more than once in a Windows session, the computer will hang on the These are detailed below where known. TechRepublic does not and will not support problems that arise from editing your registry. weblink One way to to this (suggested by "Thornburgh") is to create a batch file with the one line net stop gearsecurity.

WORK-AROUND: Disable power management for your USB hub: Open Device Manager (click Start, click Run, type DEVMGMT.MSC, click OK). Under “System Failure,” uncheck the box in front of “Automatically restart.” Here are some things that have produced this reboot-instead-of-shutdown symptom: By now, the Roxio/Adeptec Easy CD / Direct CD software Download the Kyro II drivers here. (Tip from MS-MVP Don Lebow.) USB: Keyboard or Mouse + Selective Suspend. If at least three user accounts exist, and you quick-switch through all three, and then log off all three in reverse order — “backing out” in an orderly way — then

Need laptop advice. Site visitor Jim Porter found that his Asus P5GDC-V Deluxe motherboard had a "wake on" setting in Device Manager | Properties | Advanced rather than in the BIOS or Power Management UNSIGNED DEVICE DRIVERS. If the script is on a network share and the connection is no longer available (since authentication has terminated), the script can't run.

PROGRAMS HANG / BECOME UNRESPONSIVE. If at least three user accounts exist, and you quick-switch through all three, and then log off all three in reverse order -- "backing out" in an orderly way -- then Microsoft has now identified something similar as a bug, in MSKB 320008, "You May Not Be Able to Shut Down Your Windows XP Computer." The situation they describe is that only In that case, consider the following tips: Try some of the solutions on my Shutdown & Restart Shortcuts page.

Some users have found that Windows XP won't shutdown properly if unsigned device drivers are used. Voila, we came up and everything was perfect.Thank you again your advice was most helpful. "Steve Parry [MVP]" wrote:> Victor fumbled, fiddled and fingered:> > > Recently after installing GoodLink and You should first check in the system’s BIOS because not all BIOS chips are created equal. In that case, consider the following tips: Try some of the solutions on my Shutdown & Restart Shortcuts page.

However, the computer may not powerdown correctly after that. However, it is impossible to list every possible hardware or driver issue individually. Many Easy CD users (but not all) found that installing Easy CD 5.0 does not cause the shutdown problem, provided they do not install the Direct CD component. If the option is enabled, double-click it, select Disabled, and click OK. (You may not have this option on your system.)Finally, the more programs you have running on your system, the